BPJTT - 330, FLEX GLOW NEUTRAL BASE
- MSDS: BPJTT
- Manufacturer: PARKER PAINT
- Product Name: 330, FLEX GLOW NEUTRAL BASE
- National Stock Number: 8010-00N031119
Product Identification
Product ID:330, FLEX GLOW NEUTRAL BASE
MSDS Date:06/01/1987
FSC:8010
NIIN:00N031119
MSDS Number: BPJTT
Responsible Party
TACOMA, WA 98411-0047
US
Emergency Phone: 206-473-1122
Info Phone: 206-473-1122
Preparer: B. WEAR
Cage: 9H480
Contractor
Telephone: 253-473-1122
Cage: 9H480
Ingredients
NON HAZARDOUS INGREDIENTS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:INHAL OF HIGH CONC OF
VAPORS MAY CAUSE HDCH, NAUS & IRRIT OF NOSE, THROAT & LUNGS.
EYE:MAY CAUSE IRRIT OR BURNING OF EYES. SKIN:RPTD LIQUID CONT MAY
CAUSE SKIN IRRIT & DERMAT. INGEST:SWAL LOWING CAN CAUSE GI IRRIT,
NAUS, VOMIT & DIARR. VOMIT CAN RESULT IN ASPIR OF MATL INTO LUNGS
WHICH CAN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CAUSE CHEMICAL PNEUMONITIS. CHRONIC:
UNPROTECTED OVEREXP TO MISTS FROM SPRAY APPLICATION MAY CAUSE LUNG
DISEASE (SILICOSIS).
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. IF BRTHG STOPS, APPLY ARTF RESP.
CALL MD. EYE:WASH W/CLEAN WATER FOR AT LEAST 15 MINUTES. CALL MD.
SKIN:WASH AFFECTED AREAS WITH SOAP & WATER. REMOVE CONTAMINATED
CLOTHING. CALL MD. INGEST:DRINK 1 OR 2 GLASSES OFWATER TO DILUTE.
CALL MD OR POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILDUP AND EXPLOSION WHEN EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:VENTILATE AREA. PREVENT SKIN AND EYE CONTACT
AND BREATHING OF VAPOR. CONTAIN AND REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.
Exposure Controls
Respiratory Protection:NOT REQUIRED FOR BRUSH AND ROLL APPLICATION. FOR
SPRAY APPLICATION, WEAR A PROPERLY FITTED NIOSH/MSHA (TC-23C)
APPROVED VAPOR/PARTICULATE RESPIRATOR UNTIL ALL VAPORS AND SPRAY
MIST ARE EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT VENT IN VOLUME & PATTERN TO KEEP AIR
CONTAM CONC
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:COVERALLS, GLOVES & HOOD ARE REC DURING
SPRAY APPLICATN. PROT CREAMS MAY BE USED FOR EASE OF CLEAN-UP, NOT
FOR PROT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE RESTROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Density:LTR/AIR
Spec Gravity:1.3 (H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:AMBER COLORED LIQUID WITH AMMONIACAL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.
Disposal
Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
WATER SYSTEMS. ABSORB LARGE SPILLS WITH SAND, CLAY, OR DIATOMACEOUS
EARTH. DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.